Cracker Jack Toys?

The place to ask your Cracker Jack Prize questions. (Open to All)
Post Reply
FreshBakedBling
Posts: 3
Joined: Mon Jun 14, 2010 9:25 pm

Cracker Jack Toys?

Post by FreshBakedBling » Tue Jan 18, 2011 7:44 pm

Hello Again all,

Here is a group photo of all my lovelies. First glance, are these Cracker Jack Toys? Maybe old bubblegum toys?


Thank You,
Jeanette
Attachments
008.JPG
008.JPG (90.13 KiB) Viewed 3041 times

User avatar
Luke
Posts: 1355
Joined: Thu Jun 19, 2008 7:16 pm
Location: St. Louis, MO
Contact:

Re: Cracker Jack Toys?

Post by Luke » Wed Jan 19, 2011 6:31 pm

I'll let the experts answer this question, as this is outside my limited knowledge. I re-sized the image for those with slow computers or small screens. The original image can be seen here -> Big Image.

Jeffrey Maxwell
Posts: 122
Joined: Thu Mar 10, 2011 11:48 pm

Re: Cracker Jack Toys?

Post by Jeffrey Maxwell » Wed Jun 22, 2011 6:31 pm

AGE: Although they are similar in style, mostly charms, there is a great range of items here, from the late 1930s through the 1960s.

USE: These are not Cracker Jack prizes. C.J.Co. (and later Borden) had higher quality standards for prizes. Most of these are gum machine charms, although a few were novelties marketed in other ways.

MATERIALS:
Celluloid is the plastic material used to make the smaller charms with metal rings. The large lion in the center is made of celluloid (late 1930s or early 40s). Since injection-molding was put into popular use in 1948 and made celluloid obsolete, about the only thing that celluloid is used for nowadays is to make ping-pong balls.
Injection molding was used to make the prizes with larger rings molded on top from either polypropolene (used these days to make pop bottle caps) or high density polyethylene from 1948 through the 1960s.

THE WINNER: Although there are no CJ prizes here, my favorite of this group of trinkets (and probably the most desirable item for collectors) is the scotty dog near the bottom, right of center. This appears to be made of Bakelite (or similar phenolic), the first synthetic "plastic" which is still used to make billiard balls. Due to it's theme and material this dangle was most likely produced between 1940 and 1945.

Post Reply